Use this tri-colored awareness/memorial ribbon as a patriotic tribute or to remember someone special. Create a card that honors a veteran or a scrapbook page about a visit to a history museum. Make it part of a small Memorial Day wreath or hang it up as decor at your weekend gathering as a reminder of the meaning of Memorial Day. Simply size each SVG to the same width (while keeping the proportions). Happy crafting!

All downloads are in Zip format and include the .svg files for use with Sure Cuts A Lot, Make-The-Cut, Silhouette Studio Designer Edition or any other SVG compatible software!

Like the Freebie? You’ll love our Patriotic Parade SVG Kit

Summer is upon us and now is the time to stock up on all of the kits and collections you’ve been dying to get! The more you buy, the more you save and remember, these types of sales only happen a few times a year! Use coupon code MEMORIAL2013 during checkout to save 25% on your entire purchase!

Sale Information

• Save 25% on your entire purchase! No minimum purchase required.
• Sale begins Friday, May 24th, 2013 and runs through Thursday, May 30th, 2013.
• No limit on the number of uses per customer (in case you decide you want to buy more)!

Instructions

1. Visit SVGCuts.com and start shopping! Be sure to add at least one item to your shopping cart!
2. Type MEMORIAL2013 into the Coupon field during step 2 of checkout 
3. Complete your payment and download your files! That’s it!

Interview

Click the Play button to listen now! Download option also available!

Links Mentioned During The Show

• Graphic 45 Official Site: http://www.g45papers.com
• Graphic 45 Store Locator: http://www.g45papers.com/index.php?route=information/location
• NEW PAPER LINE – Steampunk Spells
• NEW PAPER LINE – Bohemian Bazaar
• Scrapbook.com: http://www.scrapbook.com/
• Blue Moon Scrapbooking: http://www.bluemoonscrapbooking.com/

Our Graphic 45 Inspired Projects

Summer Holiday SVG Kit
Mom’s Garden Gifts SVG Kit
Maison de Madeline SVG Kit
Clara’s Christmas Eve SVG Kit
Midnight Jamboree SVG Kit

SVGCuts Videos Featuring Graphic 45

 Midnight Jamboree SVG Kit

Clara’s Christmas Eve SVG Kit

Maison de Madeline SVG Kit

Create a tropical paper project with this adorable Tiki face statue! Use it as a party decoration, or even create a banner out of five of them! Use it on a gift bag or gift box with a pretty tropical flower or create a scrapbook page of a Summer party. You could even make a tropical birthday card using Hawaiian flower paper as the card base! Simply size each SVG to the same width (while keeping the proportions). Happy crafting!

All downloads are in Zip format and include the .svg files for use with Sure Cuts A Lot, Make-The-Cut, Silhouette Studio Designer Edition or any other SVG compatible software!

Like the Freebie? You’ll love our Summer Holiday SVG Kit

SVG Kit Description

Celebrate the season of warm weather with travel-inspired paper projects! Create the adorable suitcase with stickers in a wide variety of color schemes, depending on what kind of paper you use! It could also make a great “briefcase” for Father’s Day. Make the Train Case with its cute little latches, handle and tags! The Men’s Shirt Card looks fabulous as a “Hawaiian shirt” or as a plainer, more conservative shirt for Father’s Day or for a man’s birthday card. The 3D Boat Shoe looks really cute in a very wide variety of colors and patterns and its laces finish it off perfectly! The Flamingo Card is perfect for anyone with a tropical heart – just add almost any caption or stamp to make it for any occasion. As always your download also includes each element separately to make it easy to create anything you want!

Dimensions

Each finished project measures as follows: Boat Shoe – 6.7″ long, Flamingo Card 5.5 x 6.5″, Men’s Shirt Card – 6.6 x 7″, Suitcase – 6.4 x 4  2.5, Train Case – 6 x 4 x 4″.

Trailer

Assembly Tutorial

Compatibility

SCAL2, SCAL3, ECAL, MTC, and Silhouette Studio Designer Edition. Everything can be created on any mat size, except for the cards’ envelopes, which are too large to fit on a 12×6 or 8.5×11 mat.

Paper Collection/Brand

Tropical Travelogue by Graphic 45. Stamp on Flamingo Card is from the Thanks a Bunch stamp set by Hero Arts.

Time to grab those surfboards and hit the waves, summer’s here! Take the SVG Cuts ice cream truck and create your very own surf van!

SVG Collections Used

Beach Bum II SVG Collection
Beach Bum III SVG Collection
Buckles SVG Collection
Ice Cream Birthday SVG Kit
Ryan’s Play Date SVG Kit

Supplies Used

• Carta Bella Beach Boardwalk Pattern and Solid Paper
• Echo Park This & That Woodgrain Pattern Paper
• Clear Acetate for Windows
• Wood Buttons
• Greay Jute Cord
• Epiphany Crafts Shape Tools and Epoxy Stickers. Sizes 14 and 25
• Adhesive
• Scoring Board
• Poking tool
• Toothpicks (2)

Dimensions

Instructions

1. Open truck1.svg and break apart to remove all windows except the large front window. Open up windows.svg from Ryan’s Play Date SVG Kit and break apart. Take the window and add it to the ice cream truck. Do NOT ’weld’ anything. You want these to cut out. For the rounded windows, select the rounded square shape (from your shapes library in your cutting software) and size it to 1.40” w and .952”h. Put your windows in place and cut. To help you place the windows, please see the screen shot photo.
2. Now you’ll layer the windows in the correct spot on the side2.svg file. Break the file apart and remove the current windows. Layer this file over your truck1.svg file. Line it up just right as if you were adhering it onto the actual paper. (see diagram below). Once you have it lined up just right, delete the truck1.svg file. All that should be left is side2.svg and the windows. Cut, then FLIP and cut one for the other side.
3. Open truck2.svg, resize and cut. The panel that goes on the back will be cut in an orange patterned pattern. The others will be cut in light blue paper.
4. Open patterned_panels.svg, break apart and cut the rectangle with the small circles only. Be sure to size before breaking file apart. Cut with polka dot pattern paper. Adhere to the front of the van. Use 2 Epiphany Crafts size 14 round shapes for the headlights. Next cut your roof_panels.svg in wood grain pattern paper. Adhere. I only used 3 but you can use all 4 if you prefer.
5. Open the awning.svg file and uncheck ’keep proportions’. Resize to 3.00h and 4.745”w. Using a scoring board, score fold lines every 1/4”. Using a small poking tool, poke holes about 3/4” from the edge of the awning on the SECOND fold line. Cut a piece of grey jute cord about 6” long and string through the holes. The edges of the string will be ’loose’, that’s fine. Adhere the awning onto the van. Once it’s set, pull the awning out all the way so it’s ’open’. Adhere the jute cord in place (the loose edges). I used a small dab of hot glue right where the awning meets the van. Then you’ll just adhere two wooden buttons and trim excess string if needed. When you pull the awning up, to keep it in place, simply tie a knot with the loose string under the awning. It will be ’loose’ once you start pulling it up. When the awning is ’open’ just prop it up with a couple wooden tooth picks. They hold in place all by themselves.
6. Now you’ll cut the hibiscus border. Also cut a rectangle at the same width (6.652w) and 1.00” high in orange. This goes behind the border and then adhered to the van. You’ll have to trim the excess off around the front of the van.
7. Cut 4 of the rectangle2.svg buckle in dark grey sized to 2.00” w. Adhere these on top of each other and then adhere to the top of the van. This is a surf board ’rack’. Cut two surfboards and adhere to the rack. Bend up the edges slightly to resemble a real board! Add the little seagull ’standing’ on the surfboard with a small dab of hot glue.
8. Cut another surfboard for the side of the van. Wrap some grey jute cord around the board and adhere with adhesive foam for dimension.
9. Cut the tires in dark grey. Layer two for each tire. With the epoxy shapes over the tires, they are more than sturdy enough! Make five tires, adhere one to the back with adhesive foam. I used Epiphany Crafts round 25 and round 14 shape tools to create ’hub caps’ for the wheels. Adhere all wheels to your van.
10. Now you’ll finish with the front window. Open the trim.svg file and size to 10.00”w. Remove ALL trims except the one for the front window (which is the largest rounded rectangle). Cut TWO of these in light blue. Adhere one to the van. You will NOT place acetate behind this trim. For the second trim, adhere your acetate. To get the window to look popped up, just use a VERY thin line of adhesive right at the edge then hold in place until dry.

Design Tips

Tamara Tripodi – SVGCuts Design Team Artist

• Ink some of your edges for a vintage or worn look. I love using grey ink! Plus inked edges help add dimension, too.
• Make this girly! I’d LOVE to see this done up all in hot pink, orange, lime green, etc for a girl. I think it would look awesome! You can really change the feel of this just by changing the papers.
• As always, keep the patterns vs. solid cardstock well balanced. If this had too many crazy patterns it would all just kinda ’mush’ together.
• You can REALLY go all out with this. Check out the various summer cut files SVG Cuts offers and get your wheels turning to make it your own.

Thank you for taking the time to check out my project! I hope you’ve been insired and excited about SUMMER as much as I am! Surf’s up, duuuude! Be sure to share your version of this project on the SVG Cuts Facebook wall if you give it a shot! We’d love to see!

Create a project for your big or little firefighter! Use three different shades of red for an extra-nice look, or just use all one color – red, black or yellow! Make a scrapbook page or birthday party decorations, gift bags and cards! Simply size each SVG to the same width (while keeping the proportions). Happy crafting!

All downloads are in Zip format and include the .svg files for use with Sure Cuts A Lot, Make-The-Cut, Silhouette Studio Designer Edition or any other SVG compatible software!

Like the Freebie? You’ll love our Patriotic Parade SVG Kit

SVG Kit Description

Create fantastic projects for patriotic Summer holidays! Make the Fire Engine as a gift or as a party decor centerpiece! Its rear section has a hinged lid, so it can be filled with treats and would also be delightful for kids’ birthdays. The Dalmatian Card is a sweet accompaniment to the Fire Engine and its elements can also be used separately – for example, use the dalmatian on a gift bag or scrapbook page! The Flag Bunting makes beautiful home or party decor! Imagine it for other holidays, such as orange, black and purple for Halloween, or various pinks and white for a girly birthday decoration! Create a team of Popcorn Cups filled with cheddar or caramel popcorn for your party. They look so festive and make a big bag of popcorn into an extra special party treat. Create the Scrapbook Page to show of a 4×6 photo from Memorial Day or the Fourth of July (years 2014 through 2016 are also included).

Dimensions

Each finished project measures as follows: Dalmatian Card – 5.3 x 5.5″, Fire Engine – 8 x 3 x 4″, Flag Bunting – 16 x 4″ each (can be made smaller), Popcorn Cups – 4″ tall, Scrapbook Page – 12 x 12″.

Trailer

Assembly Tutorial

Compatibility

SCAL2, SCAL3, ECAL, MTC, and Silhouette Studio Designer Edition. Everything can be made on any mat size, except for the card’s envelope and the Scrapbook Page which are too large to fit on a 12×6 or letter-sized mat.

Paper Collection/Brand

Stars and Stripes by Doodlebug Designs

This pretty floral gift set is perfect for giving your Mom a small gift to let her know how much you love her!

SVG Collections Used

Cards for Moms SVG Kit
B is for Birthday SVG Kit
Breezy Meadow Butterfly SVG Collection
Tags Galore SVG Collection

Supplies Used

• Blue card stock
• Yellow card stock
• Floral pattern paper (October Afternoon)
• Pink polka dot pattern paper (October Afternoon)
• buttons
• ribbon
• hemp cord
• embossing folder (Cuttlebug Swiss Dots)
• brads
• ink for edges
• sentiment stamps
• black ink
• ATG Adhesive
• hot glue
• foam dots

Dimensions

Card

Bag

Instructions

1. Cut card_base.svg, face_ panel.svg and interior.svg. Adhere face_panel.svg and interior to card_base.svg.
2. Cut flowers, emboss and apply blue ink to edges. Layer together with foam dots. Thread hemp cord through buttons and hot glue to center of flowers.
3. Glue flowers in center of circle cut outs.
4. Cut butterflies. Layer pink polka dot on top of black polka dot. Apply glue in the center only so wings can be lifted up.
5. Cut tag, stamp sentiment and attach with ribbon to card.
6. Thread cord through buttons and hot glue to bottom right corner.
7. Cut and assemble gift bag. Emboss flower, ink edges and assemble with foam dots. Thread cord through button and glue to center of flower. Adhere flower to bag.

Corri – SVGCuts Design Team Artist

Design Tips

• Let your pattern papers be the inspiration for color selections and paper choices.
• Embossing folders are a great way to add texture.